Downloads

News Application notes Observer Version History Firmware Version History Downloads

 

 

 

SKF @ptitude Observer Service patches

 

Important ! Please make sure to only download service patches which are compatible with the Observer version you are using. Information about which version you are using is visible in the top left corner when starting up the software.


Version 10.5.0 to 10.5.1

·       Release date 26th of September 2018

·       Installation instructions: 

        This service patch needs to be applied by downloading an installer (~ 300 Megabytes), uninstalling the previous version of Observer 10.5 and then running the installer. 


           Download

Version 10.2.0 to 10.2.2

·       Release date 4th of December 2017

·       Installation instructions: 

        This service patch needs to be applied by downloading an installer (~ 300 Megabytes), uninstalling the previous version of Observer 10.2 and then running the installer. 


           Download

      Version 10.1.X to 10.1.3

·       Release date 3rd of October 2016

·       Installation instructions: 

    This service patch needs to be applied by downloading an installer (~ 215 Megabytes), uninstalling the previous version of Observer 10.1 and then running the installer. 

     

      Download

 

Version 9.1.X to 9.1.5

·       Release date 17th of June 2015

·       Installation instructions:
- Download the zip file (~ 15 Megabytes) and replace your current files with the ones in the zip file. Please note that any open applications in the Observer suite needs to be shut down in order to replace the executable. In order to replace the monitor service file, the service needs to be stopped first.

 

      Download

 

 Version 9.0.X to 9.0.7

·       Release date 11th of March 2014

·       Installation instructions:
- Download the zip file (~ 15 Megabytes) and replace your current files with the ones in the zip file. Please note that any open applications in the Observer suite needs to be shut down in order to replace the executable. In order to replace the monitor service file, the service needs to be stopped first.

 

      Download

      

Version 8.5.X to 8.5.7

·       Release date 25th of September 2012

·       Installation instructions:
- Download the zip file (~ 10 Megabytes) and replace your current files with the ones in the zip file. Please note that any open applications in the Observer suite needs to be shut down in order to replace the executable. In order to replace the monitor service file, the service needs to be stopped first. If running Oracle database engine with Observer, the database(s) should be updated with the 850.ORADEF included in the service patch.

 

      Download

 

Version 8.4.X to 8.4.6

·         This download upgrades your current 8.4.6 version to version 8.4.6. Please note! This patch only addresses problems with the existing version of SKF @ptitude Observer and provides no new functionality.

·         Release date 2th of February 2012

·         Installation instructions:
- Download the zip file (~ 7 Megabytes) and replace your current files with the ones in the zip file. Press the download link below to start the download.

 

      Download

 

       Version 8.3.X to 8.3.5

·         This download upgrades your current 8.3.X version to version 8.3.5. Please note! This patch only addresses problems with the existing version of SKF @ptitude Observer and provides no new functionality.

·         Release date 27th of March 2011

·         Installation instructions:
- Download the zip file (~ 8 Megabytes) and replace your current files with the ones in the zip file. Press the download link below to start the download. If upgrading from Observer 8.3.0 or Observer 8.3.1 then also update the Observer database with the 832.DEF file included in the zip file.

 

      Download

 

       Version 8.2.X to 8.2.7

·         This download upgrades your current 8.2.X version to version 8.2.7. Please note! This patch only addresses problems with the existing version of SKF @ptitude Observer and provides no new functionality.

·         Release date 22nd of March 2010

·         Installation instructions:
- Download the zip file (~ 5 Megabytes) and replace your current files with the ones in the zip file. Press the download link below to start the download.

 

      Download

 

       Version 8.1.X to 8.1.4

·         This download upgrades your current 8.1.X version to version 8.1.4. Please note! This patch only addresses problems with the existing version of SKF @ptitude Observer and provides no new functionality.

·         Release date 29th of June 2009

·         Installation instructions:
- Download the zip file (~ 5 Megabytes) and replace your current executable files with the ones in the zip file. Press the download link below to start the download.

 

      Download

 

Firmware

 

       IMx Version 6.2

·         This download contains the newest features and functionalities available for the SKF Multilog IMx family.

·         Release date 30th of January 2018

·         Installation instructions:
- Download the zip file (~ 0.3 Megabyte) and extract the contents to the hard drive. In the SKF @ptitude Observer application, open up the On-line device interface by clicking the menu option On-line / IMx-MasCon units. Click on the firmware button in the On-line device interface and install the .PKG firmware file under the IMx section. Please note! The IMx unit will install the new firmware the next time it reboots. In order to force a reboot select “restart” in the On-line device interface.

     

       Download

 

     

       MasCon16 Version 1.8

·         This download contains the newest features and functionalities available for the SKF MasCon16 unit.

·         Release date 14th of January 2009

·         Installation instructions:
- Download the zip file (~ 1 Megabytes) and extract the contents to the hard drive. In the SKF @ptitude Observer application, open up the On-line device interface by clicking the menu option On-line / IMx-MasCon units. Click on the firmware button in the On-line device interface and install the .PKG firmware file under the MasCon16 section. Please note! The MasCon16 unit will install the new firmware the next time it reboots. In order to force a reboot select “restart” in the On-line device interface.

 

       Download

 

       MasCon48 Version 3.1

·         This download contains the newest features and functionalities available for the SKF MasCon48.

·         Release date 6th of July 2008

·         Installation instructions:
- Download the zip file (~ 1 Megabytes) and extract the contents to the hard drive. In the SKF @ptitude Observer application, open up the On-line device interface by clicking the menu option On-line / IMx-MasCon units. Click on the firmware button in the On-line device interface and install the .PKG firmware file under the MasCon48 section. Please note! The MasCon48 unit will install the new firmware the next time it reboots. In order to force a reboot select “restart” in the On-line device interface.

 

       Download